Product ID:AEROSHELL GREASE 5,70025
MSDS Date:04/05/1991
FSC:9150
NIIN:01-093-3300
MSDS Number: BLJMK

SHELL OIL COMPANY

HOUSTON, TX 77210
US

Emergency Phone: 713-473-9461;800-424-9300(CHEMTREC)

Info Phone: 713-241-4819

Preparer: G A VAN GELDER

Cage: 54527

SHELL OIL COMPANY

2463 HOUSTON, TX 77210 US

Telephone: 800-231-6950

Cage: 54527

SOLVENT REFINED; HYDROTREATED RESIDUAL OIL

CAS: 64742-57-0

Fraction By Weight: 89%

BENTONITE; (INORGANIC CLAY)

CAS: 1302-78-9

RTECS: CT9450000

Fraction By Weight: 6%

OSHA PEL 5 MG/M3 (DUST)

ACGIH TLV: 5 MG/M3 (DUST)

FATTY ACID AMIDES

CAS: 68910-93-0

Fraction By Weight: 3 - 5%

OTHER COMPONENTS (MIXTURE)

Fraction By Weight: <3%

UNLESS LARGE QTYS OF PROD ARE INGEST. HOWEVER,

RTECS: 9999999ZZ

IS UNECESSARY IN HIGH VISCOSITY, LOW VOLATILITY

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: MAY BE MILDLY IRRITATING. SKIN:
PRLNG/RPTD CONT MAY CAUSE VARIOUS SKIN DISORDERS SUCH AS DERMAT,
FOLLICULITIS OR OIL ACNE. RELS DURING HIGH PRESS USAGE MAY RSLT IN
INJECTION OF GREASE INTO THE SK IN CAUSING LOCAL NECROSIS. LOCAL
NECROSIS IS EVIDENCED BY DELAYED ONSET OF PAIN & TISSUE DAMAGE
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: FOLLOWING INJECTION. INHAL: NOT
EXPECTED TO BE A RELEVANT ROUTE OF EXPOSURE. HOWEVER, UNDER HIGH
TEMP CNDTNS, VAPS IRRIT TO THE NOSE, THROAT & UPPER RESP TRACT MAY
BE PRDCED. INGEST: GREASES ARE GENERALLY CONSIDERED TO HAVE A
LOWORDER OF ACUTE ORAL TOXICITY. CHRONIC: HAS NOT BEEN TESTED.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN DISORDERS MAY BE
AGGRAVATED BY EXPOSURE TO THIS PRODUCT.

First Aid:EYE: FLUSH W/WATER FOR A MINIMUM OF 15 MIN WHILE HOLDING
EYELIDS OPEN. GET MED ATTN. SKIN: REMOVE CONTAM CLTHG & WIPE EXCESS
OFF. WASH W/SOAP & WATER OR A WATERLESS HAND CLEANER FOLLOWED BY
SOAP & WAT ER. DO NOT REUSE CLTHG UNTIL THORO CLEANED. IF IRRIT
PERSISTS, GET MED ATTN. IF MATL IS INJECTED UNDER THE SKIN, GET MED
ATTN PROMPTLY TO PVNT SERIOUS DMG; DO NOT WAIT FOR SYMPS TO
DEVELOP.(SUPP DATA)

Flash Point Method:PMCC
Flash Point:550F,288C
Extinguishing Media:WATER FOG/DRY CHEMICAL/CO*2. DO NOT USE A DIRECT
STREAM OF WATER. PROD WILL FLOAT & CAN BE REIGNITED ON SURF OF
WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . COOL FIRE EXPOSED CONTRS, SURROUNDING
EQUIPMENT & STRUCTURES WITH WATER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:SCOOP UP EXCESS GREASE. CLEAN AREA WITH
APPROPRIATE CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE W/ADEQUATE
VENTILATION. KEEP AWAY FROM OPEN FLAMES AND HIGH TEMPERATURES.
Other Precautions:MINIMIZE SKIN CONTACT. WASH W/SOAP & WATER BEFORE
EATING, DRINKING, SMOKING OR USING TOILET FACILITIES. LAUNDER
CONTAM CLTHG BEFORE REUSE. PROPERLY DISPOSE OF CONTAM LEATHER
ARTICLES, INCLUDING SHOES, THAT CANNOT BE DECONTAMINATED.

Respiratory Protection:NOT ORDINARILY REQUIRED. IF NECESSARY, USE
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:USE ADEQUATE VENTILATION.
Protective Gloves:OIL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:OIL RESISTANT CLOTHING AS NEEDED TO MINIMIZE
SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD: PARTICULATES & GASES WILL EVOLVE WHEN THIS MATL
UNDERGOES PYROLYSIS/COMBUSTION. CO & UNIDENTIFIED ORGANIC CMPDS MAY
BE FORMED UPON COMBUSTION. FIRST AID PROC: INHAL: REMOVE TO FRESH A
IR. PROVIDE O*2 IF BRTHG IS DFCLT. GE MED ATTN. INGEST: DO NOT
INDUCE VOMIT. IN GEN, NO TREATMENT IS NECESSARY (ING 5)

Melt/Freeze Pt:M.P/F.P Text:500F,260C
Evaporation Rate & Reference:NOT AVAILABLE
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK AMBER, SMOOTH, SLIGHT ODOR.

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID HEAT, OPEN FLAME.
Hazardous Decomposition Products:THERMAL DECOMP PRODS ARE HIGHLY
DEPENDENT ON THE COMBUST CNDTNS. A COMPLEX MIXTURE OF AIRBORNE
SOLID, LIQUID (SUPP DATA)

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE, AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.